beautypg.com

Operation – Kenmore 911.46565 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

COOK AND HOLD

OPERATION

Setting Special Features

CONTROL LOCKOUT

Your control wIli allovA/ you to lock the
touch pads so they cannot be
activated when pressed, if you’re
worried about leaving the oven
unsupervised, activate this feature.

1. Press .and, hold, at the .saine ,

t.lnie, the..;,BAKIi'.,and,.BRO,ii.,;
pads for 3 secdhds, until the
display shows SF,

i

, ,2.

.Press’ the ■ CI.EAN pad. ^'

■ "'"TThe; display allows :LPC.'C>FF

■ ;''(lpckdut off).Г'’:^:;’^'"; T''

'■

.v;,:Y,Cb|,pressdhe.;CLEAIipad.r^ ;

-'1-015 oii.|idckQut.' , o n ) ’ . , ^ , '

3. press the START pad.

This feature can only be set
when the oyen Is iiot in use.
When this feature is on, the display
will show LOG, if a touch pad is
pressed. (This feature will not affect

the Clock or

Your new control has a cook and
hold feature for timed cooking only
that will keep hot cooked foods warm
up to 3 hours after the timed cooking
is finished. To Activate this feature:

1

. Press and hold, at the same

: time. 'the'-RAIC.E and BROIL'' ‘

pads for 3 seconds, until the
display shows SF.

fa| Press the OVEN COOKING

TIME pad. The display will show

HLdOFF.

2

.

|b| Press the OVEN COOKING
TIME pad again to activate the
feature: The display will show

'.MLdON;:..: :> >:

Press the START pad.

CHANGING

THE SPEED OF THE

UP OR DOWN ARROW PADS

This special feature will allow you to
change the speed; #1 means speed
of change Is slow, up to #5 which
means speed of change is fast. To
set the speed you prefer, follow

these steps;
1. Press and hold, at the same

time, the BAKE and BROIL

pads for 3 seconds, until the
display shows SF.

2. Press the OP arrow pad. The

display will show the current set

speed.

3. Press the UP arrow to increase

the speed up to the number 5.

Press the DOWN arrow pad to
decrease the speed down to the
number 1.

4. Press the START pad.

18

This manual is related to the following products: