How to operate the controls, Processing with the s-blade – GE 106622 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
840074400 EvOS.qxd 11/15/00
9:50 AM
.age 7
How to Operate the Controls
The controls are conveniently located
on top of the base. Rotate the center
knob to select a
Low, Medium,
or
High
variable speed. If the bowl and cover are
properly locked the
Ready
light should
be on.
Processing with the S-Blade
The S-blade can be used
to coarsely chop, finely mince,
mix, or puree food
to a smooth consistency.
1.
Make sure the Control Switch is
turned OFF and the unit is
unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 5.)
3. Place the S-blade onto motor shaft
of food processor in center of bowl.
Turn slowly until blade drops into
place.
Handle carefully; the hlade
is sharp.
Lock cover onto bowl. (See “How to
Lock the Cover” on page 5.) Insert
food pusher into food chute.
Pull all of cord out of cord storage.
This will help air flow and keep the
motor cool. Plug in unit and process
food. The processing speed and time
will determine the finished consisten
cy of the food. The Pulse button can
help you avoid overprocessing.