GE 2-9876 - Manual (Page 25)

REMOTE OPERATION
Remote Message P/ay—Provided you have entered the
security code.
Pressing ‘7’ and the mailbox number will cause the unit to
voice number of messages in the selected mailbox and then
start playing all messages in that mailbox from beginning to
end. The VOICE will give you the message number, you will
hear the message, then the VOICE will tell you the time and
day the message was received.
To play messages in Main Mailbox press 7, ^
To play messages in Mailbox Two press 7. 2
To play messages in Mailbox Three press 7, 3
Message Erase—After each message is played in full, you
will hear the VOICE say "Press 0 to erase message." You
will have 3 seconds to erase the preceding message before
the Answerer begins playing the next message.
Pressing “0" during message play will erase that message.
Message Stop —Pressing * (for 'STOP') at anytime will
terminate message playback. You will then hear the 3 tone
prompt, after which you may enter another command.
Remote Message Repeat—During message playback.
Pressing 8 (for 'REPEAT') will cause the unit to restart the
same message.
Remote Message Skip —During message playback.
Pressing 9 (for 'SKIP') will cause the unit to slop playing the
present message and start playing the next message.
Reviewing Messages — During message play.
Pressing 7 will terminate present message and play previous
message. You may continue pressing 7 to return to any
previous message.
E.
Remote
Message
Retrieval
Commar>ds
25