GE 2-9876 - Manual (Page 14)

ANSWERER OPERATION
Press and hold the desired MAILBOX button. Recording will
start after the beep. Speak into the microphone and release
the MAILBOX button when finished. Another beep will
indicate the end of the recording and the MESSAGES
indicator will be advanced by one count.
Note: A recorded MEMO is then treated like any other
message stored in a specific mailbox.
F. Recording
A Memo
O O «MAT
0 0 O
O o
The MESSAGES indicator will display the following in the
two digit display
1. If answerer is ON, the total number of messages in
memory in all mailboxes will be displayed, 00 to 40.
2. If answerer is OFF. the LED display will show “--------------
3. If answerer is not receiving AC power, the display will
be blank.
4. If a mailbox is selected to play, the total number of
messages in that mailbox will be displayed
momentarily. Then, the display will show the message
number being played.
5. If the battery needs to be replaced or there is no
battery installed, the LED display will flash "Lo".
6. If memory is full, the display will flash rapidly.
G.
Message
Counter
Display
Operation
14