Citizen Systems CLP-6401 - Manual (Page 78)

6-15
6.5 Tear-Off Function
The tear-off function eliminates the waste of labels when tearing manually.
It allows the paper to automatically advance to the tear position after
printing.
When this function is turned on, paper will be fed to the manual tear position
after printing. The printer will feed back paper to the start print position when
the next print job is sent.
If data is transmitted continuously from the computer, the tear-off function will
be suppressed to increase throughput.
6.5.1 Turning Tear ON/OFF
Tear can be turned to ON or OFF from the control panel. Default is OFF.
Indications on the control panel are as follows:
LCD
Tear-off invalid Tear-off valid
"Tear OFF" "Tear ON"
6.5.2 Tear-off when printing
If set, the tear-off feature will start if no data is transmitted for 0.5 second after
printing. If data is transmitted continuously from the computer, the tear-off
function will be suppressed.
Tear-off is only performed for the final label of each batch processing.
(The tear-off is not performed until the specified number of print sheets is
completed.)