The oven light, Electrical shock hazard, To replace the oven light – Whirlpool FGS385B User Manual

Page 27: Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CARING FOR YOUR RANGE

The oven light

The oven light will come on when you open

the oven door.

^WARNING

Electrical Shock Hazard

Make sure oven and light bulb are cool
and power to the range has been turned

off before replacing the light bulb.

The bulb cover must be in place when

using the oven. The cover protects the
bulb from breaking, and from high oven

temperatures. Because the bulb cover is

made of glass, be careful not to drop it.

Failure to follow the above could result
in electrical shock, burns, or injury from

broken glass.

To replace the oven light:

1. Unplug appliance or disconnect at the

main power supply.

2. Remove the glass bulb cover in the back

of the oven by pushing the wire holder to

the side and pulling out bulb cover.

3. Remove the light bulb from its socket.

Replace the bulb with a 40-watt appli

ance bulb.

4. Replace the bulb cover and snap the

wire holder into place. Plug in appliance

or reconnect at the main power supply.

NOTE: The oven light should not be used

during the Self-Cleaning cycle. Use during

the Self-Cleaning cycle will shorten the life

of the bulb.