beautypg.com

Notes, Burn hazard, Setting the controls – Whirlpool FGS385B User Manual

Page 21: Warning, Using the self-cleaning cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

USING THE SELF-CLEANING CYCLE

• Remove any pots and pans being stored

in the oven.
NOTE: You can clean the broiler pan and
grid in the oven if you have first removed
most of the soil by hand-cleaning or in a

dishwasher. If most of the soil is not

removed, too much smoking will occur.

• Wipe out any loose soil or grease.

This will help reduce smoke during the

Self-Cleaning cycle.

• Remove the oven racks from the oven if

you want them to remain shiny. You can

clean the oven racks in the Self-Cleaning
cycle, but they will become harder to slide.

(See page 26.) If you clean racks in the

Self-Cleaning cycle, place them on the 2nd
and 4th rack guides. (Guides are counted
from bottom to top.)

• Heat and odors are normal during the

Self-Cleaning cycle. Keep the kitchen well
ventilated by opening a window or by turn­

ing on a vent hood or other kitchen vent

during the cycle.

NOTES:

• Do not force the Lock Lever. You could

bend or break it. The lever is designed

^WARNING

Burn Hazard

Do not touch the oven during the Self­

Cleaning cycle.

Do not use commercial oven cleaners in

your oven.

Failure to follow the above could result
in burns or hazardous fumes.

to stay locked until the oven is cool enough
to safely open. Wait until it moves freely.

Do not block the vent during the Self­

Cleaning cycle. Air must move freely for
best cleaning results.

' Do not leave plastic utensils near the vent.

They may melt.

' Do not leave any foil In the oven during

the Self-Cleaning cycle. Foil could burn

or melt and damage the oven surface.

' Do not use the oven light during the Self­

Cleaning cycle. Use during the Self-Cleaning

cycle will shorten the life of the bulb.

Setting the controls

1. Set the Oven Selector to CLEAN. Push

in and turn the Oven Temperature

Control counterclockwise to CLEAN.

2. Make sure the clock and Start and Stop

Times all have the correct time of day.

3. Push in and turn the Stop Time Knob

clockwise 2 to 4 hours.
• Use 2 hours for light soil.
• Use 3 hours or more for moderate soil.
• Use 4 hours for heavy soil.

NOTE: Make sure the Start Time Knob is

not pushed in.

STOP

stabt

continued on next page

21