Lift-up cooktop, Surface burners, Awarning – Whirlpool FGS385B User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

[RARING FOR YOUR RANGE

Lift-up cooktop

1. Remove surface burner grates.

2. Lift front of cooktop at both front corners

until the support rods lock into place.

AWARNING

Personal Injury Hazard

Be sure both support rods are fully
extended and in the locked position.

Failure to do so could result in personal
injury from the cooktop accidentally

falling.

NOTE: Do not drop the cooktop. Damage
could result to the porcelain and the cooktop

frame.

3. Wipe with warm, soapy water. Use a

soapy, steel-wool pad on heavily soiled
areas.

4. To lower the cooktop, lift cooktop from

both sides while pressing the support rods
back to unlock them. Lower the cooktop
into place. Replace surface burner grates.

Surface burners

1. Lift up the cooktop, following the instruc

tions above.

2. Before cleaning, remove screws that

hold each of the burners in place. The

screws prevent the burners from moving
during shipment. Remove the shipping
screws with a Phillips screwdriver and lift

the burners up and out. This separates
the burners from the mounting bracket

under each burner pair.

3. Wipe off surface burners with warm,

soapy water and a sponge after each

use. To remove cooked-on food, soak

the burners in a vinegar and water

solution for 20-30 minutes. Scrub with a
plastic scrubbing pad.

4. If ports are clogged, clean with a

straight pin. DO NOT enlarge or distort

the ports. DO NOT use a toothpick to

clean the ports.

Screws