Flashing signal lights, Cycle selection chart – Whirlpool 9400 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R D I S H W A S H E R
Flashing signal lights
The signal lights will flash rapidly in order
when your dishwasher is first installed arxl
conneded to electricity. The signal lights will
also flash following a power failure. Press
the CANCEUDRAIN pad twice to clear the
signal lights.
PRESS TWICE
CANCEL/
DRAIN
Cycle selection chart
Cycle
A shows what steps are in each cycle
Wash Rinse
Main
Wash Rinse Rinse
Dry
Cycle
Time
(Minutes)
Pots & Pans
A double wash for maximum
cleaning of cooked-on or baked-on
foods.
NOTE: The cycle pauses to heat
water to 135“F (57°C) in both
washes (marked and in the final
rinse (marked ^). See prage 13.
•n
•tt
76*
Heavy Wash
A double wash for cleaning heavily
soiled loads.
NOTE: The cycle pauses while
the dishwasher heats water to
135°F (57®C) in the final rinse
(marked t). If the Hi-Temp Wash
option is selected water will also
be heated in the main wash
(marked tt)- See page 13.
•tt
•t
76*
Normal Wash
A double wash for normal, every
day soiled loads. (The Energy
Guide Label is based on this
cycle.)
NOTE: The cycle pauses while
the dishwasher heats water to
135°F (57“C) in the final rinse
(marked t)- If the Hi-Temp Wash
option is selected water will also
be heated in the main wash
(marked tt)- See page 13.
•n
•t
66
*
*Cycle time includes heated dry time. Cycle time may vary depending on the temperature of
the water entering the dishwasher.
continued on next page
11