Carl Goldberg GBGA1040 - Manual (Page 2)

2
Items needed to complete this kit.
1 Radio Guidance system( 2 channel
minimum required)
1 2oz. bottle CA glue
1 CA accelerator
1 30 minute epoxy
1 Box #64 Rubber bands.
1 1/4 x 8 x 12” CGP Foam Padding
For Engine Power
7 cell 1500 to 1900 mAh battery
Optional: C-20 ESC or C-30 Mini ESC speed control (Great
Planes MFG.)
Selecting Radio Control
Equipment
Radio sets are battery powered with either dry cells or the more
reliable, rechargeable nickel-cadmium (ni-cad) batteries.
Although ni-cad powered units are more expensive, the cost of
routinely replacing worn out batteries may be much higher in the
long run. Many of the radio systems now available feature
“servo reversing” switches which allow you to reverse the
response of the servo. This simplifies radio installation and is
worth considering. Exponential or dual rates are popular features
which , if used properly, can help smooth out the flight of a sen-
sitive model. Your local hobby dealer should be able to help you
select the proper radio for your needs and skill level. And be
sure to get a system designed for aircraft, as only certain fre-
quencies are available for model aircraft.
Necessary Tools and Supplies.
Roll of waxed Paper
Modeling Knife and Single Edge Razor Blade
Pins
Electric Drill
Various Drill Bit
Small Screwdriver
Masking Tape
30-60 Degree x 6” Triangle
Pencil
Limited Warranty
Carl Goldberg Products takes pride in the care and attention
given to the manufacture of components for its model airplane
kits. The company warrants replacement of any materials found
to be defective for their intended use, prior to their use in con-
struction of the aircraft, provided the buyers requests such
replacement within a 90 day period from the date of purchase
and provided the defective part is returned, if so requested by
the company.
No other warranty, expressed or implied, is made by the
company with respect to this kit. The buyer hereby assumes full
responsibility for the risk and all liability for personal or proper-
ty damage or injury arising out of the buyer’s use of the compo-
nents of this kit.
Important Information
Covering coming loose is not COVERED UNDER WARRANTY. Due to temperature
changes the plane may develop some wrinkles in the covering that you will need to
remove with an iron. Be sure to seal the edges down first so that you do not cause the
covering to shrink and leave exposed areas of wood. Please inspect the plane before
beginning to assemble to make sure you are happy with it. After assembly has begun you
cannot return the kit. If you find a problem before beginning to assemble the plane you
must contact us, please do not return it to the dealer.