Carl Goldberg GBGA1079 - Manual (Page 14)

14
30% Ultimate ARF
Locate the tail wheel bracket and
align the bend in the strut at the
rear of the fuselage. Center the
mount on the fuselage and drill two
5/64” holes at the hole location.
Harden the holes by using a couple of
drops of thin CA in each hole. Mount
the tail wheel bracket using the two
#6x3/4” pan head screws.
Install the tail wheel with a wheel
collar on both sides.
Attach the tail wheel steering
springs to the horn brackets on the
rudder horn and the tiller arm on
the tail wheel bracket.
Wheel Pants
wood block
Locate the wheel pants and identify
the left and right. The wood mount
block will be on the inside portion of
the wheel pant. Left wheel pant
shown.