beautypg.com

Overheated engine protection operating mode, Overheated engine protection, Operating mode -29 – Cadillac 2010 DTS User Manual

Page 349: If no steam is coming from the engine compartment

background image

If No Steam Is Coming From The
Engine Compartment

If an engine overheat warning is displayed but no steam
can be seen or heard, the problem may not be too
serious. Sometimes the engine can get a little too hot
when the vehicle:

Climbs a long hill on a hot day.

Stops after high-speed driving.

Idles for long periods in traffic.

Tows a trailer.

If the overheat warning is displayed with no sign of
steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highest temperature and

to the highest fan speed. Open the windows as
necessary.

3. In heavy traffic, let the engine idle in N (Neutral) while

stopped. If it safe to do so, pull off the road, shift to
P (Park) or N (Neutral) and let the engine idle.

If the temperature overheat gage is no longer in the
overheat zone or an overheat warning no longer displays,
the vehicle can be driven. Continue to drive the vehicle
slow for about 10 minutes. Keep a safe vehicle distance
from the car in front of you. If the warning does not come
back on, continue to drive normally.

If the warning continues, pull over, stop, and park the
vehicle right away.

If there is no sign of steam, idle the engine for three
minutes while parked. If the warning is still displayed, turn
off the engine until it cools down. Also, see

Overheated

Engine Protection Operating Mode

next in this section.

Overheated Engine Protection
Operating Mode

If an overheated engine condition exists and the
message ENGINE OVERHEATED STOP ENGINE is
displayed, an overheat protection mode which alternates
firing groups of cylinders helps prevent engine damage.
In this mode, you will notice a loss in power and
engine performance. This operating mode allows your
vehicle to be driven to a safe place in an emergency.
Driving extended miles (km) and/or towing a trailer in the
overheat protection mode should be avoided.

Notice: After driving in the overheated engine
protection operating mode, to avoid engine damage,
allow the engine to cool before attempting any
repair. The engine oil will be severely degraded.
Repair the cause of coolant loss, change the oil and
reset the oil life system. See Engine Oil
on
page 6-13
.

6-29