Cadillac 2010 DTS - Manual (Page 256)

For a Six-Disc CD Player
To turn the radio clock display on or off:
1. Turn the radio on.
2. Press the MENU button until
H
is displayed
3. Press the pushbutton located under
H
until the
clock and date settings appear.
4. Press the pushbutton located under the forward
arrow tab until the menu for default clock and
date settings appear.
5. Press the pushbutton located under the
currently displayed status of either ON or OFF.
The ON display indicates the radio clock display is
disabled and the OFF display indicates the radio
clock display is enabled. Press this pushbutton
to toggle the radio clock display on or off.
If the radio clock display is turned on, the screen
displays Radio Clock ON for 10 seconds, then
returns to the original clock display menu.
If the radio clock display is turned off, the screen
displays Radio Clock OFF for 10 seconds. The
menus for clock and date settings are removed, and
ON displays as a current status indicating that the
clock display can be turned on, if desired.
Setting the Time and Date
For the Single CD Player
This type of radio has a H button for setting the time
and date. To set the time and date:
1. Turn the radio on.
2. Press
H
and HR, MIN, MM, DD, YYYY (hour,
minute, month, day, and year) displays.
3. Press the pushbutton located under any one of the
tabs that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
• Another way to increase the time or
date, is to press the right SEEK arrow or
the
\ FWD button.
• To decrease the time or date, press the left
SEEK arrow or the s REV button. You can also
turn the
a
knob, located on the upper right
side of the radio faceplate, to adjust the
selected setting.
4-90