Cadillac 2010 DTS - Manual (Page 257)

For a Six-Disc CD Player
This type of radio has a MENU button for setting the
time and date. To set the time and date:
1. Turn the radio on.
2. Press the MENU button until
H
option is displayed.
3. Press the pushbutton located under
H
and the
HR, MIN, MM, DD, YYYY (hour, minute, month,
day, and year) displays.
4. Press the pushbutton located under any one of the
tabs that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
• Another way to increase the time or
date, is to press the right SEEK arrow or
the
\ FWD button.
• To decrease the time or date, press the left
SEEK arrow or the s REV button. You can also
turn the a knob, located on the upper right
side of the radio faceplate, to adjust the
selected setting.
Changing the Time and Date Default
Setting
For the Single CD Player
To change the time and date default setting:
1. Change the time default setting from 12 hour to
24 hour or the date default setting from
month/day/year to day/month/year, by pressing
the
H
button.
2. Once the clock and date settings display along with
the forward arrow tab, press the pushbutton located
under the forward arrow tab until the time 12H
and 24H, and the date MM/DD/YYYY (month, day,
and year) and DD/MM/YYYY (day, month, and
year) displays.
3. Press the pushbutton located under the desired
option, then press the
H
button again to apply
the selected default, or let the screen time out.
4-91