beautypg.com

Cadillac 2010 DTS User Manual

Page 204

background image

Manual Operation

9

(Off): Turns the entire climate control system off.

Outside air still enters the vehicle and is directed to the
floor. The airflow direction and temperature can be
adjusted, as indicated below.

If the temperature is adjusted while the system is off,
the display will light to show the current settings.

w x

(Driver’s Temperature Controls): Press the up

or down buttons next to the fan control to manually
increase or decrease the temperature inside the vehicle.

w x

(Passenger’s Temperature Controls): Press

the up or down buttons next to the air delivery
mode control to manually increase or decrease the
temperature for the front passenger. If the passenger
climate control system is off, pressing one of these
buttons turns it on.

9

(Fan Control): Turn clockwise or counterclockwise

to increase or decrease the fan speed. Turning this
control completely counterclockwise will turn on
the automatic fan operation. If the airflow seems low
when the fan speed is at the highest setting, the
passenger compartment air filter may need to be
replaced. See Passenger Compartment Air Filter on
page 4-44
.

Air Delivery Mode Control: Turn clockwise or
counterclockwise to change the current airflow mode.

Select one of the following:

AUTO: Turns on the automatic delivery mode operation.

F

(Vent): Air is directed to the instrument panel

outlets.

*

(Bi-Level): Air is divided between the instrument

panel and the floor outlets. In automatic operation,
cooler air is directed to the upper outlets and warmer air
to the floor outlets.

7

(Floor): Air is directed to the floor outlets with some

air directed to the side window outlets and the
windshield.

If recirculation is selected, it only stays on for three
minutes to reduce windshield fogging.

W

(Floor/Defog): This mode clears the windows of

fog or moisture. Air is directed to the floor outlets, with
some air going to the side window outlets and
windshield. When selected, the system turns off
recirculation and runs the air conditioning compressor
unless the outside temperature is at or below freezing.
The recirculation mode cannot be selected while in
the floor/defog mode.

4-38