beautypg.com

Braking in emergencies, Stabilitrak® system, Stabilitrak – Cadillac 2010 DTS User Manual

Page 293: System, Braking in emergencies -5 stabilitrak, System -5

background image

Using ABS

Do not pump the brakes. Just hold the brake pedal
down firmly and let antilock work. The antilock pump or
motor operating might be heard and the brake pedal
might be felt to pulsate, but this is normal.

Braking in Emergencies

ABS allows the driver to steer and brake at the same
time. In many emergencies, steering can help more than
even the very best braking.

Brake Assist

This vehicle has a Brake Assist feature designed to
assist the driver in stopping or decreasing vehicle speed
in emergency driving conditions. This feature uses the
stability system hydraulic brake control module to
supplement the power brake system under conditions
where the driver has quickly and forcefully applied
the brake pedal in an attempt to quickly stop or slow
down the vehicle. The stability system hydraulic
brake control module increases brake pressure at each
corner of the vehicle until the ABS activates. Minor
brake pedal pulsations or pedal movement during this
time is normal and the driver should continue to
apply the brake pedal as the driving situation dictates
The Brake Assist feature will automatically disengage
when the brake pedal is released or brake pedal
pressure is quickly decreased.

StabiliTrak

®

System

The vehicle may have the StabiliTrak system which
combines antilock brake, traction and stability control
systems and helps the driver maintain directional control
of the vehicle in most driving conditions. This is
accomplished by selectively applying any one of the
vehicle’s brakes and reducing engine power.

The StabiliTrak system comes on automatically
whenever the vehicle is started. The system cannot be
turned off.

This light will flash when
the system is operating.

The STABILITRAK NOT READY message may be
displayed in the Driver Information Center (DIC) and the
Traction Control System (TCS)/StabiliTrak warning
light on the instrument panel cluster comes on after first
driving the vehicle and exceeding 19 mph (30 km/h)
for 30 seconds. The StabiliTrak system is off until
the light has turned off. This could take up to 15 minutes.

5-5