Cadillac 2010 DTS - Manual (Page 147)

Park Tilt Mirrors
If your vehicle is equipped with memory mirrors, it is
capable of performing the park tilt mirror feature. This
feature allows the driver and passenger side mirror to tilt
to a factory programmed position when the vehicle is in
R (Reverse). This feature may be useful in allowing you
to view the curb when you are parallel parking.
When the vehicle is shifted out of R (Reverse) and
either a five-second delay has occurred, or the ignition
is turned to LOCK/OFF, the driver and passenger
side mirror will return to its original position.
This feature can be enabled/disabled through the Driver
Information Center (DIC). See DIC Vehicle
Customization on page 4-80 for more information.
Outside Convex Mirror
{ WARNING:
A convex mirror can make things, like other
vehicles, look farther away than they really are. If
you cut too sharply into the right lane, you could hit
a vehicle on the right. Check the inside mirror or
glance over your shoulder before changing lanes.
The passenger side mirror is convex shaped. A convex
mirror’s surface is curved so more can be seen from
the driver seat.
Outside Heated Mirrors
= (Rear Window Defogger): Press to heat the
mirrors. See “Rear Window Defogger” under Dual
Climate Control System on page 4-36 for more
information.
3-39