Surround view, Backup camera, Driving comfort – BMW 2012 X6M User Manual
Page 112
The image of the rear view camera is displayed.
The setting is stored for the remote control cur‐
rently in use.
Malfunction
A Check Control message, refer to page
displayed in the instrument cluster.
The areas in front of and behind the vehicle ap‐
pear in shaded form on the Control Display. PDC
has failed. Have the system checked.
To ensure full operability:
▷
Keep the sensors clean and free of ice.
▷
When using high-pressure washers, do not
spray the sensors for long periods and main‐
tain a distance of at least 12 in/30 cm.
Surround View*
The concept
Surround View encompasses the following sys‐
tems:
▷
.
▷
▷
.
It provides assistance when parking and ma‐
neuvering and at blind driveways and intersec‐
tions.
Backup camera*
The concept
The rear view camera assists you when parking
and maneuvering in reverse. To accomplish this,
the region behind your vehicle is shown on the
Control Display.
System limits
Check the traffic situation as well
Check the traffic situation around the ve‐
hicle with your own eyes. Otherwise, an accident
could result from road users or objects located
outside the picture area of the backup camera.◀
Detection of objects
High, protruding objects such as ledges
may not be detected by the backup camera.◀
Switching on automatically
With the engine running or the ignition switched
on, shift the selector lever into position R.
The image of the rear view camera is displayed
when the system has been switched on using
iDrive.
Switching off automatically
The system switches off and the LED goes out:
▷
After approx. 33 ft/10 m when driving for‐
ward.
▷
After approx. 9 mph/15 km/h when driving
forward.
Switch on the system again if necessary.
Switching on/off manually
Press the button.
▷
On: the LED lights up.
▷
Off: the LED goes out.
If PDC is displayed, switch on the backup cam‐
era via the iDrive, refer to page
Seite 112
112
Online Edition for Part no. 01 40 2 606 735 - 03 11 500
Driving comfort