Fuses – BMW 2013 3 Series User Manual
Page 205
to ensure that all comfort functions are fully
available and that any Check Control messages
are no longer displayed.
Charging the battery
Note
Do not plug the charger into the socket
Do not connect battery chargers to the
factory-installed sockets in the vehicle. Doing so
may result in damage to the vehicle.◀
Starting aid terminals
In the vehicle, only charge the battery via the
starting aid terminals, refer to page
engine compartment with the engine off.
Power failure
After a temporary power loss, some equipment
needs to be reinitialized.
Individual settings need to be reprogrammed:
▷
Seat and mirror memory: store the positions
again.
▷
Time: update.
▷
Date: update.
▷
Radio station: save again.
▷
Navigation system: wait for the operability of
the navigation.
Disposing of old batteries
Have old batteries disposed of by your
service center or bring them to a recy‐
cling center.
Maintain the battery in an upright position for
transport and storage. Secure the battery so
that it does not tip over during transport.
Fuses
Notes
Replacing fuses
Never attempt to repair a blown fuse and
do not replace a defective fuse with a substitute
of another color or amperage rating; this could
lead to a circuit overload, ultimately resulting in
a fire in the vehicle.◀
Plastic tweezers and information on the fuse
types and locations are stored in the fuse box in
the cargo area.
In the engine compartment
1.
Use the onboard vehicle toolkit to loosen the
three cover screws, arrow 1.
2.
Pull up the holder, arrow 2.
3.
Remove the cover from one side, arrow 3.
4.
Press the four fasteners and remove the
cover.
Attaching the covers
1.
When attaching the cover, make sure that all
four fasteners are engaged.
Seite 205
Replacing components
Mobility
205
Online Edition for Part no. 01 40 2 903 880 - 07 12 490