Avlink SX-2088 - Manual (Page 30)

SX Matrix Switching System—User Manual
29
9.0 SX Matrix System Technical Parameters
Model
Technical Parameters
SX-2088 SX-2084 SX-2044
Video
Enhancement 0dB
Bandwidth 150MHz (-3dB)，Full Load
Max. Transmission Delay 20nS(±1nS)
Switching Speed 50nS(Longest Time)
Signal Type S-Video
Video Input
Connectors 8 S-Video Female
Connectors
8 S-Video Female
Connectors
4 S-Video Female
Connectors
Signal Strength Composite Video
Min./Max. Voltage Modulated Signal 0.5V~2.0Vp-p
Impedance 75Ω
Video Output
Connectors 8 S-Video Female
Connectors
4 S-Video Female
Connectors
4 S-Video Female
Connectors
Min./Max. Voltage 2.5Vp-p
Impedance 75Ω
Audio Signal
Input/Output Connectors RCA(R/L) Female Connector
Signal Type Stereo, Balanced and Unbalanced Connection
Impedance Input: 10KΩ
output:75Ω
Max. Input Level +19.5dBu
Max. Output Level +19.5dBu
Control Types
Serial Control Connectors RS-232，9-Pin Female D Type Connector
Baud Rate and Protocol 9600bps, no odd or even calibration address, 8bit
transmission address, 1bit stop address
Serial Control Port Structure TX，RX，GND
Control Procedures
《AV Matrix》
Specifications
Power 100VAC~240VAC,50/60Hz，International Auto-Switch
Power
Temperature Storage, Operating Temp.: -40℃~+85℃