Avlink SX-2088 - Manual (Page 22)

SX Matrix Switching System—User Manual
21
Key LCD Display Operation
7. Press the NO. 4 key of the
input channel for 2 seconds to
select operation of previously
set NO.4 channel to NO.1, 3, 5
channels for output. Enter the
output channel when VIDEO
shows input channel NO.4 on
NO.1, 3 and 5 channels on the
LCD.
8. Press the NO.6 key of the
output channel for 2 seconds
and enter the input channel
when the red 0 on LCD
flickers.
9. Press the NO.4 key of the
input channel for 2 seconds to
select the operation of input
from NO.4 channel and output
from NO.1, 3, 5 and 6
channels. VIDEO shows “4” at
NO.1, 3, 5 and 6 channels on
LCD.
7.0 Matrix Application Software
7.0.1 Software Introduction
The 《AV Matrix》 Matrix control software applies to different input/output matrixes.
7.0.1.1 Software Description
The《AV Matrix》 matrix testing software is an application tool developed for matrix testing
and application. The software operation environment is as follows:
Window98/2000/NT/XP operatng systems
32M interal memory or above
10M hard disk space or above
CD-ROM
At least one serial communicatin port