Avlink YX-1024 - Manual (Page 9)

YX-1024 Matrix Switching System—User Manual
8
6.0 YX Matrix System Technical Parameters
Model
Technical Parameters
YX-1024
Video
Enhancement 0dB
Bandwidth
250MHz (-3dB), Full Load
Max. Transmission Delay 10nS(±1nS)
Switching Speed 40nS(Longest Time)
Signal Type Component/Composite Video
Video Input Connector 2 Set RCA Female Connectors
Video Input Impedance 75Ω
Video Output Connector 4 Set RCA Female Connectors
Video Output Impedance 75Ω
Audio
Signal Type Stereo, Balanced or Unbalanced, Digital Optical TOSlink
Audio Input Connector
2 Set RCA Female Connectors
2 Digital Optical TOSlink
Audio Output Connector
4 Set RCA Female Connectors
4 Digital Optical TOSlink
Specifications
Power Adaptor DC 12V / 1.25A
Operating Temperature -40 ~+ ℃ 85℃
Operating Moisture 10%~90%
Housing Measurements 440(L)x185(W)x43mm(H)
Product Weight 2450g
Median Failure Interval 30,000 Hours
7.0 Common Problems and Solutions
1. What to do if the YX-1024 matrix front panel keys switching not responsive?
Answer: The YX matrix front panel keys employ scanning testing and require longer response
time. Press the keys for 2 seconds and then release. This way, key switching will be
responsive in operation.
2. What to do if YX-1024 matrix does not display or color display is abnormal after hot plug?
Answer: Switching of the matrix system goes through the IC chips. If the voltage difference
between the input signal equipment and the matrix equipment is too large, hot plug
could easily cause damage to the IC chips. Please turn off power to the system before
plugging or unplugging.