Antari X-510 PRO - Manual (Page 9)

9
Antari X-30PRO Control Module Operation
X-30PRO Wireless Control Module Operation
All the X-10PRO features plus wireless capability.
The wireless control module X-30PRO consists of a transmitter equipped with two buttons for fog on
and off, and a receiver pre-attached to the panel of each X-30PRO.
* Transmitter:
With the transmitter it is possible to emit fog via radio over a distance of up to 50 meters. The
transmitter is compatible to any receiver of the X-30PRO and can control an unlimited number of
machines in parallel.
Press the button “A”, to emit fog. The button “A” has the same function as the button VOLUME on the
control panel, i.e. the fog output depends on the setting of menu item »Volume Out«. The display
indicates 「Volume」 followed by the defined value or 「NON STOP BURST」 when continuous fog
output was selected. To stop the fog output, press the button “B”.
* Receiver:
The receiver is tested and pre-attached to the panel of each X-30PRO. Please do not try to remove it.
The receiver responds to up to 5 different transmitters that are registered with the machine. The
included transmitter has been registered to the machine before shipment. It can be directly operated
without any start-up setting.