AltiGen MAXCS 7.0 MaxCommunicator - Manual (Page 76)

70 MaxCommunicator Manual
• Echo Suppression—Check this check box if you are
experiencing echo.
• ToS(Hex)—The ToS byte indicates the type of service. For
IPTalk, you need high priority service, and the default of “0”
set here indicates high priority service. However, if your
company router supports DSCP EF, then set this field to “A0”.
The ToS value is gateway-based. For guidance, see your
system administrator.
• 802.1—This setting is related to the priority given to voice
packets traversing your network. For guidance on setting this
value, see your system administrator.
• From the Voice Through drop-down list, choose the sound
card that will carry the incoming and outgoing voice. It could
be a sound card in your PC, or it could be a USB-based sound
card in your headset system.
• From the Ring Through drop-down list, choose the device
that will carry the incoming ring. When you’re away from your
desk, you may prefer the ring to come through your PC
speakers, rather than your headset system.