ALTANA Haze-Gloss Short Operating Instructions - Manual (Page 2)

Gardner
BYK-Gardner, Inc. • 2435 Linden Lane • Silver Spring • MD 20910 USA • Phone: 800-343-7721 • Fax: 301-589-9044
5. Set Up (grey keys)
The set up key calls a menu of consolidated functions which are seldom
changed or seldom used.
Sequence:
Set-Up Selecting the function by moving the cursor
Operate Changing the function or jump to a sub-menu
Sample Escape/Return
Functions:
• Haze Compensation (on/off)
Optional subtraction of sample brightness from the haze value
(reading is marked by n.c.).
• Calibration
Jump into the menu-driven calibration mode.
• Automatic Measurement(on/off)
Automatic starting of measurements.
• Target (on/off)
Illuminated Target facilitates sample positioning.
• Lower (4 cm/7cm)
Motorized sample support table (foot switch) can be lowered by 4 or 7 cm.
• Decimal Point
Optional suppression of the readings' decimal point.
• Language (US, D, F, I, E)
Changing the language to English, German, French, Italian and Spanish is
possible.
• Mirror Mode (on/off)
Changing the mode to mirror reflection measurement (metal surfaces).
• Change Calibration Value
Jump into the input menu to input gloss values of customized mirror gloss
standards.
• Custom Specific Calibration (on/off)
Changing from mirror gloss measurements calibrated at the manufacturer to
mirror gloss measurements calibrated at the customer. (Only if defined).