AERCO Steam Generator - Manual (Page 3)

INSTRUCTIONS – AERCO HELITHERM STEAM GENERATOR MODEL SS1B-PLUS
SG-101-1
TABLE OF CONTENTS
Section Page
SAFETY PRECAUTIONS SG-101-1
GENERAL INFORMATION SG-101-3
INSTALLATION SG-101-5
PRINCIPLES OF OPERATION
SG-101-7
OPERATING PROCEDURES SG-101-8
ROUTINE MAINTENANCE SG-101-10
TROUBLESHOOTING SG-101-11
CORRECTIVE MAINTENANCE
SG-101-12
DESCALING BY THERMAL SHOCK SG-101-13
DISASSEMBLY SG-101-14
REASSEMBLY SG-101-16
RECOMMENDED SPARE PARTS
SG-101-19
SAFETY PRECAUTIONS
Installing or operating personnel must, at all times, observe all safety regulations.
The following warnings are general and must be given the same attention as
specific precautions included in the instructions
SHUT OFF ALL INCOMING AND OUTGOING STEAM AND WATER STOP
VALVES AND CAREFULLY DECREASE ALL TRAPPED PRESSURES TO ZERO
(see Step OP8, Shutdown, in OPERATING PROCEDURES Section) BEFORE
PERFORMING ANY MAINTENANCE.
WARNING!
LIVE STEAM CAN CAUSE SEVERE BURNS
NEVER ATTEMPT TO SEARCH FOR LEAKAGE IN A LIVE STEAM SYSTEM BY
“FEEL”. USE A MIRROR OR OTHER SUITABLE POLISHED OBJECT.
WARNING!
FLUIDS UNDER PRESSURE MAY CAUSE INJURY TO PERSONNEL OR
DAMAGE TO EQUIPMENT WHEN RELEASED