Acura 2000 NSX - Owner's Manual - Manual (Page 59)

Steering Column Controls
Headlights
The rotating switch on the left pod
controls the lights. Turning this
switch to turns on the parking
lights, taillights, instrument panel
lights, side-marker lights, and rear
license plate lights. Turning the
switch to raises the headlights
and turns them on.
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver's door.
To change between low beams and
high beams, pull the turn signal lever
as far as it will move towards you,
then let go. The blue high beam
indicator will light (see page 52 ).
To flash the high beams when the
headlight doors are closed, pull back
and hold the turn signal lever. This
simultaneously raises the headlight
doors and turns on the high beams.
Release the lever and the high
beams go off. Within a few seconds,
the headlight doors will close
automatically.
The high beams will stay on for as
long as you hold the lever back, no
matter what position the headlight
switch is in.
Daytime Running Lights
(Canadian Models)
Your car has Daytime Running
Lights (DRL) in addition to the
headlights. With the ignition ON (II)
and the light switch OFF or at
DRL turns on when you release the
parking brake. DRL turns off when
you turn the ignition off or the
headlights on.
Instruments and Controls
Main Menu Table of Contents