beautypg.com

Lights – Acura 2000 NSX - Owner's Manual User Manual

Page 222

background image

Lights

Replacing Side Marker Bulbs

1. Use your fingernail to lift the

rubber seal along the back edge of

the side marker lens.

2. Use a small flat blade screwdriver

under the rubber seal to pry
carefully on the back edge of the

side marker assembly until it pops
out of the body.

3. Remove the electrical connector

from the bulb holder by squeezing
the connector and pulling them
apart.

4. Turn the socket one-quarter turn

counterclockwise to remove it
from the lens.

5. Pull the bulb straight out of its

socket.
Push the new bulb straight into
the socket until it bottoms.

6. Put the socket back into its hole in

the lens and turn it clockwise until
it locks.

7. Plug the wire harness back into

the bulb holder.

8. Turn on the parking lights and

check that the new bulb is
working.

9. Put the side marker assembly

back into the body, front first.
Push on the back edge until it
snaps into place.

Maintenance

RUBBER SEAL

FLAT BLADE

SCREWDRIVER

BULB HOLDER

CONNECTOR

Main Menu

Table of Contents