beautypg.com

Lights – Acura 2000 NSX - Owner's Manual User Manual

Page 221

background image

Lights

Replacing Front Turn Signal and

Parking Light Bulbs

1. Use a Phillips-head screwdriver to

loosen the turn signal assembly's

mounting screw.

2. Remove the turn signal assembly

from the bumper. Remove the

electrical connector from the bulb

holder by squeezing the connector

and pulling.

3. Remove the bulb holder from the

turn signal assembly by turning it
counterclockwise.

4. To remove the turn signal bulb,

push it in slightly and turn it
counterclockwise. To remove the
parking light bulb, pull it straight
out of its holder.

5. Install the new bulb in the socket.

6. Push the bulb holder into the turn

signal assembly and turn if
clockwise until it locks.

7. Reconnect the electrical connector

to the bulb holder.

8. Test the lights to make sure the

new bulb is working.

9. Put the turn signal assembly into

the bumper. Install and tighten the
mounting screw.

Maintenance

Main Menu

Table of Contents