beautypg.com

Drive belts, timing belt – Acura 2000 NSX - Owner's Manual User Manual

Page 209

background image

Drive Belts, Timing Belt

Drive Belts

You should check the condition of

the two engine belts every 2 years.

Examine the edges of each belt for
cracks or fraying. Check the tension

of each belt by pushing on it at the

point shown in the diagram.

The belts should have the following

"play" or deflection.

Alternator belt:

0.4 — 0.53 in (11 — 13.5 mm)

Compressor belt:

0.4 — 0.5 in (10 — 12 mm)

If you see signs of wear or looseness,
have your dealer adjust or replace
the belts.

Timing Belt
The timing belt should normally be

replaced at the intervals shown in
the maintenance schedule.

Replace this belt at 60,000 miles (U.S.)

or 100,000 km (Canada) if you

regularly drive your car in one or

more of these conditions:

In very high temperatures

(over 110°F, 43°C).

In very low temperatures

(under — 20°F, — 29°C).

Maintenance

COMPRESSOR BELT

ALTERNATOR BELT

Main Menu

Table of Contents