beautypg.com

Fuses – Acura 2000 NSX - Owner's Manual User Manual

Page 265

background image

Fuses

Checking and Replacing Fuses
If something electrical in your car

stops working, the first thing you

should check for is a blown fuse.
Determine from the chart on pages

264

and

265

, or the diagram on the

fuse box lid, which fuse or fuses

control that component. Check those

fuses first, but check all the fuses

before deciding that a blown fuse is
not the cause. Replace any blown

fuses and check the component's

operation.

1. Turn the ignition switch to LOCK

(0). Make sure the headlights and
all other accessories are off.

2. Remove the cover from the fuse

box.

FUSE

BLOWN

3. Check each of the large fuses in

the under-hood and engine
compartment fuse boxes by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head screw-
driver.

FUSE PULLER

4. Check the smaller fuses by pulling

out the fuse with the fuse puller
provided in the interior fuse box.

Taking Care of the Unexpected

Main Menu

Table of Contents