Instrument panel indicators – Acura 2006 TSX - Owner's Manual User Manual
Page 63
The instrument panel has many
indicators to give you important
information about your vehicle.
You will also see a ‘‘CHECK
EMISSION SYSTEM’’ message in
the multi-information display (see
page
). For more information, see
page
.
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you and your
front passenger have not fastened
your seat belts.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belts, the beeper sounds,
and the indicator flashes. If you do
not fasten your seat belts before the
beeper stops, the indicator stops
flashing but remains on.
If your front passenger does not
fasten their seat belt, the indicator
comes on about 6 seconds after the
ignition switch is turned to the ON
(II) position.
If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals. For more
information, see page
.
You will also see a ‘‘FASTEN SEAT
BELT’’ or ‘‘PASSENGER FASTEN
SEAT BELT’’ message in the multi-
information display (see page
).
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
You will also see a ‘‘CHECK
ENGINE OIL LEVEL’’ message in
the multi-information display (see
page
).
If this indicator comes on when the
engine is running, the battery is not
being charged, and you will also see
a ‘‘CHECK CHARGING SYSTEM’’
message in the multi-information
display (see page
). For more
information, see page
.
Instrument Panel Indicators
Low Oil Pressure
Indicator
Seat Belt Reminder
Indicator
Malf unction Indicator
Lamp
Charging System
Indicator
62
Table of Contents
Table of Contents