Acura 2006 TSX - Owner's Manual - Manual (Page 117)

With ‘‘WIPER SETUP’’ shown in the
multi-information display, press the
SEL/RESET button on the steering
wheel. The display changes to
‘‘FRONT WIPER ACTION’’ as
shown above.
Press the SEL/RESET button, then
press the INFO button.
Each time you press the INFO
button, the display changes from
‘‘WITH VEH SPD,’’ to
‘‘INTERMITTENT,’’ and then to
‘‘EXIT.’’
Press the INFO button to select
‘‘WITH VEH SPD’’ or
‘‘INTERMITTENT,’’ and enter your
selection by pressing the SEL/
RESET button.
When ‘‘WIPER SETUP’’ is shown in
the multi-information display, the
action of the windshield wipers can
be changed. To do this, refer to the
following procedure.
Wiper Setup Front Wiper Action
Multi-Information Display
116
Table of Contents Table of Contents