You can store two driver’s seat, steering wheel, and door mirror positions into
memory when the vehicle is on. When you unlock and open the driver’s door with
a remote transmitter, the items adjust automatically to one of the two preset
positions.

1. Adjust the seat, steering wheel, and mirrors to

your preferred positions.

2. Press SET.
3. Press and hold memory button 1 or 2. You will

hear two beeps when the memory is set.

Press one of the memory buttons to recall
previously stored positions.
Lumbar positions cannot be stored.

Memory button 1

Memory button 2

SET button

Adjusting the Steering Wheel

The steering wheel height and distance from your body can be adjusted so that you
can comfortably grip the steering wheel in an appropriate driving posture.

Press and hold the adjustment switch to move the
steering wheel in, out, up, or down.

Adjusting the steering wheel position while driving may cause you to lose
control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.

WARNING

Adjustment switch

Rear Seats

Adjust second-row seats, access third-row seats, or fold down seats for additional
cargo space.

Adjusting the Second-Row Seats

Horizontal position

adjustment
Pull up the bar to move the

seat, then release the bar.

Seat-back angle

adjustment
Pull up the lever to

change the angle.

Accessing the Third-Row Seats

Press the button on the second-row seat back
or outer seat side. The second-row seat slides
forward to allow easy access to the third row.
The button is inoperable when the vehicle is
moving.