Adjusting the mirrors, P. 41, Warning – Acura 2015 MDX - Owner's Guide (Without Software Update) Ver. ST02 User Manual
Page 24

40 |
| 41
VEHICLE CONTROLS
VEHICLE CONTROLS
For a head restraint system to work properly:
•  Do not hang any items on the head restraints or from the restraint legs.
•  Do not place any object between an occupant and the seat-back.
•  Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and 
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
Failure to reinstall, or correctly reinstall, the head restraints can result in 
severe injury during a crash.
Always replace the head restraints before driving.
WARNING
WARNING
Floor Mats
Position the front and rear seat floor mats 
properly and anchor them. If they are not properly 
positioned, the floor mats can interfere with the 
front seat functions.
Do not put additional floor mats on top of the 
anchored mats.
Unlock
Lock
Adjusting the Mirrors
Adjust the angle of the mirrors for the best visibility when you are sitting in the 
correct driving position. 
Automatic Dimming Rearview Mirror
When driving after dark, the automatic dimming 
function reduces the glare from headlights 
behind you.
A green indicator appears when automatic 
dimming is on. The function cancels when the 
shift lever is in Reverse (R).
Power Door Mirrors
Adjust the power door mirrors when the vehicle is on. 
L/R selector switch: Select the left or right 
mirror. After adjusting the mirror, return the 
switch to the center position.
Mirror position adjustment switch: Press the 
switch left, right, up, or down to move the mirror.
Folding door mirror button*: Press to fold the 
door mirrors in or out.
Reverse Tilt Door Mirrors
Either side door mirror can tilt downward when 
you shift to Reverse (R) to improve visibility on 
the selected side of the vehicle when reversing. 
The mirror returns to its original position when 
you shift out of Reverse. 
When in Reverse, slide the selector switch to the 
left or right side.
Indicator
Sensor
Adjustment switch
Selector switch
Folding
button*
Selector switch
*if equipped (Canadian models)
