A&D Weighing SJ-30KWP - Manual (Page 25)

23
Item Parameter Description
0 Five-level (Result LED blinks.)
1 Five-level (Result LED lights.)
2 Three-level (Result LED blinks.)
3 Three-level (Result LED lights.)
4 Seven-level (Result LED blinks.)
Comparator mode
Cp-l
5 Seven-level (Result LED lights.)
Sets comparator
mode
0 Comparator disabled
1 Compares all data
2 Compares all stable data
3 Compares all data of ≥ +5d or ≤ -5d
4 Compares stable data of ≥ +5d or ≤ -5d
5 Compares data of ≥ +5d
Comparison
conditions
Cp
6 Compares stable data of ≥ +5d
Sets comparison
conditions
d = minimum display
in kg
0 Dark
1
2
3
Comparator
LED brightness
Cp-i
4 Bright
Adjusts LED
brightness of
comparison result
0 Normal comparison
Normal/Negative
comparison
Cp-p 1
Negative comparison for take-away
check weighing
Refer to
“9. AUTO-TARE”
0 Auto-tare function disabled
Auto-tare
function
at
1 Auto-tare function enabled
Refer to
“9. AUTO-TARE”
0 Immediately after OK and stable
1 0.5 second after OK and stable
2 1.0 second after OK and stable
3 1.5 seconds after OK and stable
4 2.0 seconds after OK and stable
5 2.5 seconds after OK and stable
6 3.0 seconds after OK and stable
7 4.0 seconds after OK and stable
8 5.0 seconds after OK and stable
Auto-tare timing
at-t
9 10 seconds after OK and stable
Timing to tare
automatically after
the comparison OK
and stable weight.
0 Function disabled
Auto-tare of the
initial weight
at-f
1 Tares the initial (container) weight.
Automatic operation
Factory setting