A&D Weighing SJ-30KWP - Manual (Page 15)

13
Seven-level comparator mode (portion weighing mode)
Results Comparison formula LED display
None Displayed value < Level 1 lower limit, or “ -e ”
( No LEDs on)
LOLO
(Level 1)
Level 1
lower limit ≤ Displayed value < Level 2
lower limit
( Red LED on)
LO
(Level 2)
Level 2
lower limit ≤ Displayed value < Level 3
lower limit
( Yellow LED on)
OK
(Level 3)
Level 3
lower limit ≤ Displayed value ≤ Level 3
upper limit
( Green LED on)
HI
(Level 4)
Level 3
upper limit < Displayed value ≤ Level 4
upper limit
( Yellow LED on)
HIHI
(Level 5)
Level 4
upper limit < Displayed value ≤ Level 5
upper limit
( Red LED on)
None Level 5 upper limit < Displayed value, or “ e ” ( No LEDs on)
The comparator values are common to the weighing and counting mode.
Ignore the decimal point when setting the comparator values.
Example for SJ-6000WP when the setting value is “001000”:
Display mode Limit value Capacity / Minimum display
Normal resolution kg 1.000 kg 6.000 kg / 0.001 kg
High resolution kg 0.1000 kg 6.0000 kg / 0.0005 kg
Maximum resolution g 100.0 g 6000.0 g / 0.2 g
Low resolution oz 100.0 oz 210.0 oz / 0.1 oz
Normal resolution oz 10.00 oz 210.00 oz / 0.05 oz
High resolution oz 10.00 oz 210.00 oz / 0.02 oz
Counting mode 1000 pcs
The comparator values are maintained even if the power is turned OFF.
The scale does not judge magnitude relation among the comparator values.
Even if the wrong values are set, no error will be shown.