Panasonic EY3530NQMKW - Manual (Page 3)

Introduction
Thank you for purchasing the Panasonic
Metal Cutter. The powerful cutting action of
this cutter, combined with the convenience of
its rechargeable battery pack, provides you
with great metal cutting performance.
This Metal Cutter is only to be used for
cutting unhardened ferrous metal and plastic
material.
DANGER
This product is a cutting tool, designed to
cut through metal. It has a rotating blade
which is capable of a cutting you deeply,
causing serious injury or death. As a result,
please read this manual and the cautionary
markings on the tool carefully, and obey all
of the safety instructions and additional
safety instructions to avoid such injury.
WARNING
>To avoid irtjury, never insert your finger or
any other object into any opening of the
metal cutter.
How to Use This Manual
• Please read this manual completely before
starting to cut with your Metal Cutter.lf you let
someone else use the Metal Cutter, make
sure they either read this manual or are fully
instruct^ in the proper use and all safety
precautions concerning the Metal Cutter.
• Please Keep this manual for further reference.
It contains important safety information that
you must foNow to use the Metal Cutter safety.
•This manual and product use the following
signal words:
NOTE
Notes provide additional information that you
should know about the Metal Cutter.
CAUTION
Caution indfcaiss a poCentiaMy hazardous situation,
which could resuR in rninor or rnoderate iiMy if not
avoided. Cwjtions also alert you to unsafe pta^ioes
to be avoided.
WARNING
№mting indtoatas a potofitiatty fskzantous situation, which
could result in serious injury or death if not avoided.
DANGER
Oartger Incticates an imminent hazard which will
result in serious toju^ or death If not avoided.
GENERAL SAFETY RULES-
FÒR ALL BATTERY
OPERATED TOOLS
WARNING!
READ AND UNDERSTAND ALL MSTRUCT10NS.
Failure to follow all instructions listed below,
may result in electric shock, fire and / or
serious personal injury.
SAVE THESE JNSTHUCTIONS
Work Area
1
}
Keep your work area clean and wril lit
Ctuttered benches and dark areas irwRe aoddenla.
2} Do not operate power toole in exploeeve
aftmoepheree, such as In the ргемпсе of
flammable liquide, gasee, or dust
Power tools create sparks which may
ignite the dust or fumes.
3) Keep bystanders, children, and vlaltora
away while operating a power tool
Distractions can cause you to lose control.
Make sure that no one is beneath, or on the
other side of the area where you ate working.
Electrical Safety
4) A battery operated tool with Integral
battartee or a aaparala batlary pack must
be
recharged only with the specified
charger for the battery.
A charger that may be suitable for one type
of battery may create a risk of fire when
used wHh another battery.
5) Use battery operated tool only with
epedhcetly designated battery pack.
Use of any other batlerfee may create a risk
of file.
Personal Safety
6) Stay alert, watoh what you art doing, and
use common aanee whan operating a
power tool. Do not use tool while tired or
under the Influence of drugs, aicohol, or
medication.
A monert of inattention while operating power
tools may result in serious personal injury.
7) Drees properly. Do not wear loose cktfhing
or jewelry. Conteln long hair. Keep yow
hair, clothing, end gloves ewey from
moving parts.
Loose clothes, jewelry, or long hair, can be
caught in moving parts.
4 —