Panasonic EY3530NQMKW - Manual (Page 13)

For Proper Use (Further Detail)
WARNING
1. It to InipOftant lo use an appropriate device
to hold the malertol being cut property, and
to hold the cutter firmly with both hands to
prevent loes of control which could cause
personal Irijury.
• Rgure 8 shows proper cuning position.
Note that hands are kept away from cutting
area.
Whwi cutting, do not try to hold the material
with your hand.
WARNING
2. Support large pieces of material, near
the cut. Be sure to support large pieces
of material properly to minimize the risk
of blade pinching and kickback.
• Use sharp blades only. Clean and shaqp
blades minimize stalting and kidcback.
3. Oont support the material away from the
cut.