Citizen Systems CLP 6002 - Manual (Page 23)

E
N
G
L
I
S
H
3.8 Adjustable Media Sensor
The adjustable media sensor is standard on the CLP 6001, 6401 and 7201e
models. It can be fitted as an option to all other models.
If the printer has both a fixed sensor and an adjustable sensor installed,
remember to select the “AjSensON” setting in the control panel. See section 2.5
for more details.
The location of the media sensor is shown by the yellow position mark. This can
be moved from left to right using the adjustment knob. Moving the adjustment
knob will cause a click for each position change.
Remember to set the voltage levels for the new type of media as described
elsewhere in this manual.
If the printer has both a fixed sensor and an adjustable sensor installed,
remember to select the “AjSensON” setting in the control panel. See section 2.5
for more details.
Adjust-knob
Mark (Yellow) Guide rail upper
37
.7
7
0.
6
192.4