3 connection to power, 4 connection to a computer – Citizen Systems CLP 6002 User Manual
Page 11
E
N
G
L
I
S
H
1.3 Connection to Power
CAUTION
Always use an AC outlet that accepts a
three-pronged plug. Otherwise, static electricity
may be generated and there will be danger of
electric shock.
Connect to an AC outlet as follows:
1 Check that the power switch on the printer is set to OFF.
2 Connect the connector of the power cord to the power inlet on the printer.
3 Insert the plug of the power cord in the AC outlet.
1.4 Connection to a Computer
An interface cable is necessary for connecting the printer to a computer.
To connect them, proceed as follows:
1 Turn off both power switches of the printer and the computer.
2 Connect the connector of one end of the interface cable to the interface
connector at the lower side of the printer and secure it correctly.
3 Connect the connector of the other end of the interface cable to the interface
connector on the computer and secure it correctly.
CLP 1001, 2001, 6001, 6002, 6401
CLP 7201e, 7202e
Serial interface
Parallel interface
Serial interface
USB interface
Parallel interface