Hardy HI 6300 Series - Manual (Page 25)

Installation 17
•
•
•
•
•
•
Step 1. Attach the mounting brackets using the supplied brackets and screws
Exploded View of the Wall Mount Assembly – Rear View
Step 2. Place the assembled wall mounted unit against the wall
Step 3. Mark the centers of the wall mounting brackets
Step 4. Drill and insert the required wall plugs if attaching to brick, concrete, or plaster board.
If attaching to wood use a pilot drill to ensure alignment.
Step 5. Position the assembled wall unit over the holes and using the appropriate screw fasten
to the wall.