Hangar 9 Piper Pawnee 40 ARF - Manual (Page 21)

21
Required Parts
• Wing strut (front) (right and left)
• Wing strut (rear) (right and left)
• 3mm nut (4)
• Strut end (4)
• Wing strut bracket (4) • #4 washer (4)
• Wing tube (small) • Wing tube (large)
• 4-40 lock nut (4) • Retainer pin clip (4)
• 1/4-inch (4mm) fuel tubing (4)
• Strut attachment pin (4)
• 4-40 x 1/2-inch socket head screw (18)
Required Tools and Adhesives
• Threadlock • Adjustable wrench
• Hex wrench: 3/32-inch
 Step 1
Thread a 3mm nut onto each of the struts.
 Step 2
Thread a strut end onto each of the struts.
 Step 3
Attach the wing strut brackets to the wing using four
4-40 x 1/2-inch socket head screws.
Note: Make sure to use threadlock on the
screws to prevent them from vibrating loose.
Section 3: Wing Attachment