GEA Bock HG88e - Manual (Page 29)

D
GB
F
E
I
Ru
29
96260-11.2014-DGbFEIRu
7.5 Decommissioning
Close the shut-off valves on the compressor. Drain the refrigerant (it must not be discharged into the
environment) and dispose of it according to the regulations. When the compressor is depressurised,
undo the fastening screws of the shut-off valves. Remove the compressor using an appropriate hoist.
Dispose of the oil inside in accordance with the applicable national regulations.
7| Maintenance
7.4 Extract from the lubricants table
The oil type filled as standard in the factory is marked on the name plate . This oil type should be
used as a preference. Alternatives are stated in the extract from our lubricants table below.
Refrigerants GEA Bock standard oil types Recommended alternatives
HFC
(e.g. R134a, R404A,
R407C, R407F)
Fuchs Reniso Triton SE 55
Fuchs Reniso Triton SEZ 32
Esso/Mobil EAL Arctic 46
Sunoco Suniso SL 46
Texaco Capella HFC 55
HCFC (e.g. R22) Fuchs Reniso SP 46
Fuchs Reniso SP 32
BP Energol LPT 46
Sunoco Suniso 3,5 GS
Texaco Capella WF 46
HG88e / ... 2735-4 (S) 3235-4 (S)
Designation Item No. Item No.
Set of gaskets kit 81007
Valve plate kit 81040 81041
Oil pump kit 80116
Oil sump heater kit (220-240 V) 80237
Only use genuine GEA Bock spare parts!
7.3 Recommended spare parts