GEA Bock HG88e - Manual (Page 13)

D
GB
F
E
I
Ru
13
96260-11.2014-DGbFEIRu
Rigid
fixed point
Fig. 16
As short as
possible
4.5 Laying suction and pressure lines
A rule of thumb: Always lay the first pipe section starting from the shut-off valve downwards
and parallel to the drive shaft.
ATTENTION Improperly installed pipes can cause cracks and tears, the result
being a loss of refrigerant.
INFO Proper layout of the suction and discharge lines directly after
the compressor is integral to the system’s smooth running and
vibration behaviour.
4| Compressor assembly