FRITSCH PULVERISETTE 4 classic line - Manual (Page 14)

n Unauthorised alteration of the PULVERISETTE 4 will void Fritsch's
declaration of conformity to European directives and void the guar-
antee.
n Only use the PULVERISETTE 4 when it is in proper working order, as
intended and in a safety- and hazard-conscious manner adhering to
the operating manual. In particular, immediately rectify any malfunc-
tions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protective equipment
Protective equipment must be used as intended and may
not be disabled or removed.
All protective equipment must be checked regularly for
integrity and proper functioning.
Start-up is only possible with the hood closed.
The hood is locked:
n without mains connection
n during operation
The hood can only be opened when the mill's drive is at
standstill.
2.6.1 Opening the hood without mains connection
1. Unscrew the grating on the left side of the device at the top.
Safety information and use
- 14 -