Elektron Analog Four User Manual
Page 77
SETUP EXAMPLES
69
6.
Select track 1. Set WAV on the OSC1 page to IN L. For oscillator 2, choose one of the internal Analog Four
waveforms.
7.
Note trigs placed on track 1 will now control both the internal and the external oscillators.
•
Use parameter locks to alternate the waveform of oscillator 1 between external/internal selections.
•
This example can use more than one external oscillator. If two separate external oscillators are
connected to the Analog Four external inputs, both oscillators can be used on for example track 1.
Track 2-4 could then use only internal oscillators.