Elektron Analog Four - Manual (Page 3)

WARNING
To reduce the risk of fire, electrical shock or product damage:
•
Do not expose the apparatus to rain, moisture, dripping or splashing and also avoid placing objects filled with liquid, such as vases,
on the apparatus.
•
Do not expose the apparatus to direct sunlight, nor use it in ambient temperatures exceeding 35°C.
•
Do not unmount the enclosure. There are no user repairable or adjustable parts inside. Leave service and repairs to trained service
personnel only.
ADDITIONAL INSTRUCTIONS FOR THE POWER ADAPTER ELEKTRON PSU-3
WARNING
•
The adapter is not safety grounded and may only be used indoors.
•
To ensure good ventilation for the adapter, do not place it in tight spaces. To prevent risk of electric shock and fire because of over-
heating, ensure that curtains and other objects do not prevent adapter ventilation.
•
Do not expose the power adapter to direct sunlight, nor use it in ambient temperatures exceeding 40°C.
•
Connect the adapter to an easily accessible electrical outlet close to the apparatus.
The adapter is in standby mode when the power cord is connected, the primary circuit is always active as long as the cord is con-
nected to the power outlet. Pull out the power cord to completely disconnect the adapter.
IMPORTANT SAFETY INSTRUCTIONS
Carefully read these instructions and save them for future reference.
1. Do not use this apparatus near water.
2. Never use any aggressive cleaners on the casing or the LCD
overlay. Remove dust, dirt and fingerprints with a soft, dry
and non-abrasive cloth. More persistent dirt can be removed
with a slightly damp cloth using only water. Disconnect all
cables while doing this. Only reconnect them once the appa-
ratus is safely dry.
3. To avoid scratches or damage, never use sharp objects near
the display. Also avoid applying any pressure to the display
itself.
4. Install in accordance with the manufacturer’s instructions.
Make sure you place the unit on a stable surface before use.
If you mount the unit in a rack, be sure to tighten all four
screws in the rack mount holes.
5. Connect to an easily accessible power outlet close to the
apparatus.
6. In the EU, only use CE approved power cords.
7. When transporting the unit, preferably use accessories rec-
ommended by the manufacturer or the box and padding the
unit originally shipped with.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or any other apparatus (including amplifi-
ers) that produce heat.
9. Do not block the ventilation holes located on the side and the
bottom of the enclosure of the unit. Attaching rack ears is still
possible because of increased general ventilation when the
unit is rack mounted.
10. Do not put the PL-1 Protective Cover (Analog Four acces-
sory) on the unit while the unit is powered on.
11. This product, either alone or in combination with an amplifier
and headphones or speakers, may be capable of producing
sound levels that could cause permanent hearing loss. Do
not operate for a long period of time at a high volume level or
at a level that is uncomfortable.
12. Protect the power cord from being walked on or pinched par-
ticularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
13. Only use attachments/accessories specified by the manufac-
turer.
14. Unplug this apparatus during lightning storms or when
unused for long periods of time.
15. Refer all servicing to qualified service technicians. Servicing
is required when the apparatus has been damaged in any
way, such as liquid having been spilled, objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.