Elektron Analog Four - Manual (Page 53)

GLOBAL MENU
45
GLOBAL MENU
The GLOBAL menu offers settings that affect the Analog Four on a global level. Global tune, MIDI and CV set-
tings are made here. Up to four Global slots, where each can have individual settings, are available.
Access the menu by pressing [FUNCTION] + [KEYBOARD C2]. Scroll the list by using [UP]/[DOWN] or the
LEVEL knob. Open a highlighted menu by pressing [YES/SAVE].
PROJECT
Here projects are managed. This menu is covered in the section “PROJECTS” on page 12.
GLOBAL SLOT
Selects which of the four Global slots to use. Select the active slot by using the [LEFT]/[RIGHT] arrow keys.
Press [YES/SAVE] to confirm the selection. All changes made to a Global slot are automatically saved. A slot
stores the current configuration of the synth, sequencer, CV and MIDI settings . All changes made to a Global
slot are automatically saved.
SYNTH CONFIG
Here the Analog Four master tune and calibration settings are found.
MASTER TUNE sets the master tune for the analog oscillators. The default setting is 440.0 Hz.
CALIBRATION will start the calibration routine for the oscillators, pulse widths and filters. After selecting this
option, a popup window asking to confirm the calibration will appear. Press [YES/SAVE] to proceed with the cali-
bration. Please note the calibration routine takes a while to complete.
• The Analog Four is factory calibrated. It should not be re-calibrated unless specifically stated by
Elektron Support.