Elektron Analog Four - Manual (Page 36)

THE SEQUENCER
28
THE SEQUENCER
The sequencer of the Analog Four stores information in patterns. A pattern controls the playback of the synth,
FX and CV tracks and various aspects of these tracks. Each of the 8 banks, ranging from A to H, can host 16
patterns, meaning 128 patterns are available. All adjustments made to the patterns are automatically saved.
Changes made to the active pattern can however be reverted. Read more in “PATTERN MENU” on page 31. A
pattern contains:
• Note trigs for all tracks.
• Trigless locks for all tracks.
• Parameter locks.
• Trig mutes.
• Accent trigs.
• Note and parameter slide trigs.
• Swing trigs.
• ARP and NOTE menu parameter settings.
• Information about which kit is linked to the pattern.
• Length and time signature for the tracks.
BASIC PATTERN OPERATIONS
The Analog Four can seamlessly switch between patterns. This, plus the ability to chain patterns, are handy fea-
tures when for example making live improvisations.
SELECTING A PATTERN
Press the [BANK GROUP] key to choose the bank group from which a pattern will be selected. If for example
bank group A-D is chosen, patterns in banks A, B, C and D can be selected. Next, press a [BANK] key followed
by a [TRIG] key to select a pattern within the selected bank. To select for example pattern B05, select bank
group A-D using the [BANK GROUP] key. Then press and hold [BANK B/F] and press [TRIG] key 5.
Patterns containing data are indicated by half-bright red LEDs. The currently active pattern is indicated
by a full-bright red LED. When selecting a pattern containing no data, the kit of the previous pattern will
be used.
When a pattern is playing and a new pattern is selected, the new pattern position will blink on top of the graphics
indicating the position of the current pattern.
• Pattern selection can be made using only one hand. After a [BANK] key has been pressed, a win-
dow will appear for a short while, stating “CHOOSE PTN”. If a [TRIG] key is pressed while this win-
dow is visible, a pattern will be selected.
• Patterns can be changed while the sequencer is running.
• Patterns can be changed and queued by sending program change messages.
• After having selected a pattern, and before releasing any key, [REC], [PLAY] and [STOP] can be
pressed to copy, clear or paste patterns. No new chain will be built, nor any pattern enqueued. It is
possible to clear, copy or paste multiple patterns at the same time.
PATTERN CONTROL
Pressing [PLAY] will start the playback of a pattern. Pressing [STOP] will stop the playback of all tracks. The
sound will be cut off, but effects like the Saturator Delay will continue to be audible until the delay repeats have